Can you put ddr3/1600 instead of 1333?

Yes you can. But the 1600 will run at 1333. Footnote: This is also the case if you choose to use 1600MHz RAM on a motherboard that only handles 1333MHz – It’ll run as fast as it’s allowed to.

Can I use 1333MHz RAM on a 1600MHz board?

Can I use 1333mhz ram in a 1600mhz motherboard? Yes, you can, but it will limit the performance of the motherboard. Basically, once SIMM or DIMM sockets became established, anything that will fit the socket correctly will work, but the slowest component will hold back everything else.

Why does my 1600MHz RAM shows 1333MHz?

1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it. It will not harm anything.

Does RAM speed have to match motherboard?

In order for memory to work on your system, it must be compatible with your motherboard.

Why is my RAM speed at 1333?

DDR memory makes an operation on the leading edge and the trailing edge of each clock cycle, so there are two operations per clock. So, a 1333 MHz memory bus speed clock equals 2666 MT/s DDR RAM. This would often erroneously called 2666 MHz RAM, but it isn’t really. It is 2666 MT/s RAM.

What happens if my RAM speed is too high?

It makes no difference. If the RAM run as a faster frequency then supported by the CPU it will be ran at the frequency that is supported. The simple fact is your unlikely to see a difference unless you double or triple the difference of difference memory.

What happens if I use RAM of a faster speed than the motherboard supports?

How do I know which RAM is compatible with my motherboard?

The easiest way to tell if a certain RAM stick will work with your motherboard or not is to look at the motherboard specifications. This should give the details regarding the type, amount and the RAM characteristics that the motherboard can support.

How do you overclock DDR3 1333 MHz to 1600MHz?

The RAM however might not, I’ve usually not seen any basic DDR3 go very high, but 1333MHz to 1600MHz might be doable, set the speed to 1600 if you can, RAM voltage to 1.55 to 1.65 and set the timings to CL11-11-11-28 as a starting point, and see if that’s stable, or you could just see if 1600 is stable at stock, and …

What is the difference between DDR3 1333 or 1600 MHz memory?

What is the difference between DDR3 1333 or 1600 mhz memory and which one to choose? In conclusion, the difference between 1333 and 1600 is in the frequency of the clock, and in the intensity of the heating and consequently in the performance. However, the choice is not as simple as it seems.

What is the difference between a 1333 and a 1600 clock?

In conclusion, the difference between 1333 and 1600 is in the frequency of the clock, and in the intensity of the heating and consequently in the performance. However, the choice is not as simple as it seems.

What is the speed of a 1333 Ram inverter?

DDR3 1333 RAM . The 1333 DDR3 RAM operates at a clock frequency of 667 MHz. At the same time, the actual speed of the inverter is 1333 megatransfers per second. That is, 1.3 million signals are transmitted in 1 second. This PM provides high RAM reliability.

What is the speed of a 1600Mhz Ram?

DDR3 1600 RAM The DDR3 1600 RAM operates at a clock frequency of 800 MHz. The actual speed of the unit is 1600 megatransfers per second. This PM provides reasonably high performance.