What is resin anchor?

What is resin anchor?

Chemical resin anchor is the term given to anchors that are not fitted in the traditional anchored method e.g. with the expansion of the anchor or the thread cutting into the surface of the hole.

How long does Simpson epoxy take to set?

Mixed material in nozzle can harden in 30 minutes at temperatures of 70°F (21°C) and above. Use only appropriate Simpson Strong-Tie mixing nozzle in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair SET-XP adhesive performance.

How deep should epoxy anchors be?

TIP: the hole depth should be a minimum of 4 1/2 times the diameter of the bolt (a 1/2 inch threaded rod would require a hole depth of 2 1/4 inches).

How long does Simpson SET-XP take to cure?

For example: SET-XP will take 72 hours to cure at 50 degrees. Also keep in mind that epoxy will not cure in temperatures below 50°. (For colder adhesive installations, consider using an acrylic-based adhesive such as Simpson AT or AT-XP.)

Does epoxy get old?

Epoxy shelf life can last many years when resin and hardener are properly stored at room temperature and in closed containers to prevent contamination. Those who have used polyester resins know that its shelf life is only about six months before it turns to a useless jelly-like substance.

Which anchor is best for concrete?

For that reason, the best concrete screws are either stainless steel, galvanized, or zinc coated. Many are simply coated with a corrosion-resistant layer, which is usually blue. These materials do better in damp conditions and resist the moisture present in concrete surfaces.

Why choose Simpson Strong-Tie® epoxy adhesives?

Simpson Strong-Tie ® epoxy adhesives meet or are rigorously tested to meet 2009 IBC requirements for both cracked and uncracked concrete applications. As you would expect, Simpson Strong-Tie offers all the high-strength dispensing tools and other important accessories to increase productivity on any project.

How do I See comparative Simpson Strong-Tie® products?

Choose a code agency. Choose the code report for which you wish to see a comparative Simpson Strong-Tie® product.

Why choose Hilti Hy 200 A/R V3 injectable adhesive anchors?

Damp conditions cause unwanted downtime, but Hilti’s top performing HY 200 A/R V3 injectable adhesive anchors keep the job moving forward in both wet and dry climates. While the competition’s adhesives take a load reduction in water-saturated concrete, our specifically designed products maintain load capacity without compromise.

What is the difference between hit-Hy 200-R V3 and Simpson® chemical adhesive?

When compared with Simpson® chemical adhesives, our flexible range offers faster cure times for both hot and cold climates, along with more working time to increase efficiency. HIT-HY 200-R V3: slower cure times for more working time up to 104 degrees Fahrenheit