What size is derby cover?

What size is derby cover?

I have a friend that has a 2015 Road Glide and a 2016 Road Glide and the 2015 derby cover is 7 1/4 inches in diameter and the derby cover on the 2016 is 7 3/4 inches in diameter.

What size are Harley primary cover bolts?

The bolts are 5/16” UNC (Unified Coarse) threads x ¾” long.

What is the torque on a Harley derby cover?

The derby cover torque specs are 84-108 in lbs.

What size are Harley primary bolts?

The bolts are 5/16” UNC (Unified Coarse) threads x ¾” long. The heads are the good looking Allen button head design.

How do you remove a stuck primary cover?

You can try to break the seal with a small thin blade screwdriver. Go up from the bottom in case you leave a small mark or 2. Try pressing it into the gasket material to seperate it a little. Once you get it started it should come off pretty easy.

How tight should derby cover?

Just snug them up. The really important thing is not to over tighten them! They are only keeping the gaskets compressed.

What is the torque for Harley primary cover?

Your torque wrench should be set at 84-108 inch-pounds of torque. Remember to tighten them in a star pattern much like the lug nuts on a car tire.

What is the torque on a derby cover on a Harley?

What is the torque on a primary cover on a Harley?

Registered. Outer primary cover is 108-120 inch (9-10 ft.) lbs.

How much oil does Harley primary hold?

Fill the primary with oil Harley Davidson Softails require one quart of primary fluid.

What oil should I use in my Harley primary?

The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.

Can you use ATF in Harley primary?

We submit that ATF is too thin for Harley primary use. It’s true that many Harley riders have had years of problem-free performance with ATF. We contend that a thicker oil will provide superior metal-to-metal wear protection. Chains and sprockets will last longer using a fluid with an appropriate viscosity.

How much oil does a Sportster primary take?

approximately 1 qt
Insert the nozzle of a funnel into the primary chain inspection hole. Pouring slowly, pour approximately 1 qt of oil into the transmission.

Where can I find information about servicing and maintaining my Sportster?

Select the Miscellaneous Resources for information about resources that can be helpful to servicing and maintaining your Sportster. You’ll find parts sources, service bulletins, recalls, manuals, etc. in this section.

Are there different size bolts in the parts Manual?

The service manual makes no mention of different size bolts or their placement (though I was aware bolts were different lengths), and the parts manual only shows two part numbers for the two different length bolts, but does not reflect which ones go where!

How many bolts are on a clutch adjustment cover?

With the Rubbermount models, starting in 2004-later, the cover has a rectangular primary chain inspection cover, held in place by two screws. The clutch adjustment cover is the large Derby Cover, but it is mounted with 6 bolts.

Why do I need to add miscellaneous resources to my Sportster?

Because there is some overlap in technical information between the Ironhead and category in the other model section. Select the Miscellaneous Resources for information about resources that can be helpful to servicing and maintaining your Sportster.