How do I change the convergence on my Samsung TV?

To adjust manual convergence on your projection TV, follow theses steps:

1. Turn your TV on.
2. Let it warm up for 30 minutes.
3. Press the Menu button on your remote.
4. Use your remote to select Function, and then press the joystick.
5. Select Convergence, and then press the joystick.
6. Select Red, and then press the joystick.

How do I program my Sony projection TV?

Auto Program the TV Channels

1. Turn on your TV.
2. On the supplied remote, press the MENU button.
3. Press the RIGHT ARROW button to select the channel icon.
4. Press the SELECT button.
5. Press the UP ARROW or DOWN ARROW button to select Auto Program.
6. Press the SELECT button.

How does a projection TV work?

A projection television uses a projector to create a small image or video from a video signal and magnify this image onto a viewable screen. The projector uses a bright beam of light and a lens system to project the image to a much larger size.

What is auto convergence?

The action that allows the wheels to be well aligned and aligned is the same convergence. If there is a problem with the alignment of the wheels of the car with the axis of the machine, the tire would be consumed quickly but especially in an uneven manner at the ends or in the center of the rubber.

What is TV convergence?

Convergence can be understood as the progressive merging of traditional broadcast and internet content.

How do I get my channels back on my Sony TV?

Touchpad Remote

1. Press the HOME button.
2. Select Program Guide from the Apps row and select Guide.
3. Press the Action Menu and select the Yellow button.
4. Enter your Sony PIN.
5. If you have hidden any channels, an option to ‘Restore all channels’ will be offered to you. Press the Action Menu and select the Red button.

How do I scan for channels on my Sony TV?

In the Settings window, tap the TV/Video button. In the Settings window, under Settings, tap the Channel Settings button. In the Settings window, under Settings, tap the Auto Program button. In the Starting automatic channel scan window, tap the OK button.

Why is my Sony TV not finding any channels?

If the scan does not find any or all channels, you may try to change the Scan Type setting to Full scan. IMPORTANT: It may take an hour or longer when selecting Full scan to tune your TV. ​If you have problems with the Cable tuning procedure, please check with your provider as they may use different settings.

How do I carry the projection TV?

Carry the projection TV in the specified manner If you carry the projection TV in a manner other than the specified manner and without the specified number of persons, it may drop and a serious injury may be caused. Be sure to follow the instructions mentioned below. ❑ Carry the projection TV with the specified number of persons.

How do I add receivable channels to projection TV?

Projection TV is fixed to one channel ❏ Use Auto Program in the Channel menu to add receivable channels that are not presently in TV memory (see page 54). ❏ Check your Channel Fix settings (see page 54).

How to use the twin view function of the projection TV?

1Move the joystick right to activate the right picture (if not already activated). 2Move the joystick up to enlarge the picture and move the joystick down to reduce the picture. ✍When you adjust the twin screen sizes, the projection TV memorizes the change. The next time you use the Twin View function, the memorized sizes appear. v V

Why is my picture highlighted in cyan on my projection TV?

Be sure your DVD player, VCR or satellite receiver are connected to one of the VIDEO IN 1-6 and AUX inputs on the rear of the projection TV. Pictures from equipment connected to VIDEO 5, 6 and AUX will only appear in the left picture, not in the right. ✍The active picture is highlighted in cyan. Using the Features 43 Using the Features