How do I know what size U joint I have?

You measure from the outer side of the lock ring groove side to side. This gives you the width of the joint lock. You still need to measure the overall width of the joint to make sure it is compatible with the bolt-on yoke.

Are all 1310 U joints the same size?

Standard u-joints sizes are classified by series, with each series having specific cap diameter and overall joint width. Typically speaking, a higher series number translates to a stronger joint….Understanding U-Joints.

Series	1310
Cross Width	3.219 (3 7/32”)
Cap Diameter	1.062 (1 1/16”)
Spicer P/N	5-1310X

How strong is a 1410 u-joint?

Driveshaft U-Joints

Series	Max Angle	Max. Cont. Tq.
1310	30 °	800 lbs-ft.
1330	20 °	890 lbs-ft.
1350	20 °	1,240 lbs-ft.
1410	35-37 °	1,500 lbs-ft.

Are all 1310 u-joints the same size?

What is the diameter of a 1350 u-joint?

Most common driveshaft u-joints applications will use outside locks, where lugs (image 1) or snap rings (image 2) are used to secure and align the u-joint caps in the yoke….Understanding U-Joints.

Series	1350
Cross Width	3.625 (3 5/8”)
Cap Diameter	1.188 (1 3/16”)
Spicer P/N	5-1350X

How wide is a 1350 u-joint?

Take note that the u-joint is only as strong as the smallest series number. The 1310 to 1350 U-Joint Cross Width is 3.625 (3 5/8”) on the 1350 side and 3.250 (3 1/4”) on the 1310 side. The Cap diameters are different as well. 1 1/16″ on the 1310 side and 1 3/16″ on the 1350 side.

How wide is a 1410 u-joint?

Understanding U-Joints

U-Joint Series	Width Center/Center	Torque Specifications
1310/1330	1.416 in.	14-17 Ft-Lbs
1330 BC*	1.590 in.	14-17 Ft-Lbs
1350/1410	1.666 in.	20-24 Ft-Lbs

Are 1310 u-joints strong?

Most racers upgrade to the bigger 1350 U-joints for more strength. According to Spicer, the 1310 joint is rated at 400 lb-ft of continuous torque (down the track) and 800 lb-ft of short-term torque (launch at the line). The 1330 has the same size caps as the 1310, but the U-joint cross is the same size as a 1350.

How much torque can a 1310 u-joint handle?

While the 1310 series, the stock size for most Jeeps, is rated for 1,600 lb-ft of torque.”

How much torque can a 1350 U-Joint handle?

The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque.

Are all 1310 U-joints the same size?

What size is a 1350 U-joint?

Understanding U-Joints

U-Joint Series	Width Center/Center	Currie Strap Kit P/N
1310/1330	1.416 in.	CE-4058
1330 BC*	1.590 in.	CE-4059
1350/1410	1.666 in.	CE-4060P

How strong is a 1310 u-joint?

What are the different sizes of the 1310 wheel joints?

1310 (Wheel Joint) – – 5-760X 5-760XC 5-760SPX-WJ 1310SPEC 5-1201X – 5-7439X – – 1330 5-213X 5-1330-1X** 5-1330X – – 1330 aluminum – – 5-3614X† – –

What are the dimensions of the U-joints?

1100/1110 Series U-Joint 1.718 x 1.718 – 1 inch caps inside c clips 1100/1110 Series U-Joint 2.411 x 2.411 -.938 inch caps outside snap rings 1210 Series U-Joint 2.438 x 2.438 – 1.062 outside snap ring 1.062 X 1.062 Bearing Cap Diameter

How many U-joints are there in the 1310 series?

FATIGUE TESTING: 1310 SERIES U-JOINTS 1,000,000 900,000 800,000 700,000 600,000 500,000 400,000 300,000 200,000 100,000 FATIGUE CYCLES Competitor A Competitor B Competitor C Competitor D Spicer Life Series® SPL®Part # 5-1310X Spicer 10Series Spicer Part # 5-153X

Why choose Spicer®10 series U-joints?

Spicer®10 Series U-Joints, from the Most Trusted Name in Drivelines. Spicer®10 Series u-joints are manufactured using statistically controlled processes to ensure the same high-quality part every time. Zerks on both sides allow for thorough lubrication to maximize part life, and a steel journal cross