What is a good horsepower for a router?

Most of the combo kits that are advertised as 2-1/4 hp pull 12 amps. This is plenty of power for most people. In the US the largest amp rating allowed for routers is 15 amps.

Are Makita routers made in Japan?

Makita RP2301FC Plunge Router 12mm (1/2″) 2,100W, Made in Japan. HIGHLIGHTS: Combines power and precision for the most demanding routing applications. Powerful 2,100 W motor delivers 9,000-22,000 RPM for the most demanding applications.

What’s the difference between a router and a plunge router?

In other words, if you set a fixed base router at a cut depth of 1/4″, the router bit protrudes past the base 1/4″ until you change the depth. A plunge base router is designed so that you can preset the cut depth and then lower (“plunge”) the bit into the cut with the router’s base flat on the surface of the material.

How powerful should a router be?

Also, your router should not have less than 128MB of RAM. The ideal would be 256 MB of RAM or more. This is to make sure that it can process everything as fast as possible. If money is not an issue, you should seek a wireless router with 512 MB of RAM or 1 GB.

What size router do I need for wood?

Q: What size wood router is recommended? It depends on the project. Light-duty routing with a ¼-inch collet router is absolutely fine, while heavy-duty work requires a ½-inch collet.

How do I choose the right router?

How to Choose a Router

1. Consider how much you want to spend on a router.
2. Check to see if your new router is compatible with your ISP.
3. Make sure your router supports the internet speed you pay for.
4. Look for a newer wireless protocol.
5. Use mesh Wi-Fi or extenders to spread Wi-Fi through your house.
6. Don’t forget optional features.

How do I choose a router for woodworking?

WHAT TO LOOK FOR IN A ROUTER

1. Power. You need adequate power to meet your specified woodworking goals, but the benefit of high power has to be set against the disadvantage of using a heavy router for handwork.
2. Motor Speed.
3. Switch.
4. Base Aperture.
5. Collet.
6. Plunge Depth.
7. Handles.
8. Side Fence.